 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Oscilent Corporation IF SAW Filter | 821-IF120.0M-C Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 821-IF120.0M-C TYPE : 20 x9.8 SMD 120.0 MHz IF SAW Filter Jan. 01, 2007 120.0 MHz IF SAW Filter PART NUMBER : 821-IF120.0M-C OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss Source Impedance (single ended)* Load Impedance (single ended)* Temperature Coefficient Amplitude Ripple within fo+/-9.75Mhz 1dB Bandwidth 3dB Bandwidth 40dB Bandwidth Lower Sidelobe Upper Sidelobe Absolute Delay at Fo Group Delay Variation w/ fo+/-9.75Mhz Minimum 119.9 20.4 50 50 Typical 120.0 21.5 50 50 -72 0.7 20.2 20.5 21.8 2.3 40 Maximum 120.1 25.5 1.0 22.0 100 Units MHz dB ohm ohm ppm/C dBp-p MHz MHz MHz dB dB sec nsec *With Matching Network (Ref. Testing Environment Circut as shown below). Those impedances could be modified with different impedance values and/or structures, if necessary. ** Custom SAW IF Filters available. Contact Oscilent for assistance. PACKAGE OUTLINE (mm) TEST FIXTURE L1 = 56nH C1 = 33pF L2 = 68nH C2 = 20pF Source/Load Impedance = 50 ohms Pin Descriptions: IN-10, OUT-5, GROUND- 1,2,3,4,6,7,8,9 FREQUENCY RESPONSE Oscilent Corporation IF SAW Filter | 821-IF120.0M-C Page 2 of 2 Part No.: 821-IF120.0M-C Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map |
Price & Availability of 821-IF1200M-C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |